Stitching pictures help required

scooby99 · September 21st, 2013, 10:03 PM

I have 10 Page 3 pics I would like to post up, I don't see them on the site. Most are full page I can scan them in 2 parts, but I don't have software to stitch them together. Can anyone stitch them for me if I email the parts?
Thanks for the help

scooby99 · September 21st, 2013, 11:27 PM

OK seems nobody can help. They are the entire collection of Page 3 in 3D from July 1991 and January 1992.
Will scan and post as 2 part images.
Girls are:-
Kathy Lloyd, Donna Ewin, Katie Orgill, Ruby Finnegan, Rachel Garley. Full page. Sarah Jaffer, Kathy Lloyd, Lisa Bangert, Sammi, not full page

**haVEFun here** · September 21st, 2013, 11:47 PM

Hello Scooby99,

Where are going to post these images? In each model thread?

Please try to scan the pages with an overleap and post the whole scan without trimming the edges.

With kind regards, haVEFun here

**haVEFun here** · September 22nd, 2013, 12:58 AM

Thanks for posting

Please try this:

Scan the page 90 degrees turned/tilted: Probably You can scan the image now in one go (in one piece).

Use at least 300 dpi and upload the full size scan, please

Upload preferably NOT with host Imagebam.com, as they changed policy, resulting in difficulties with downloading! Update, July 24, 2021

To prevent bleedtrough of text and images from the back page, put a darker sheet behind the page to be scanned. Try with a black or a brown / dark brown piece of paper.

See also the other ''Scanning feedback'' threads in the help-section, see here:

http://vintage-erotica-forum.com/forumdisplay.php?f=46

With kind regards, haVEFun here

.

P.S. i am not sure if You have posted Your images in the correct section, therefore a repost here , to prevent information getting lost.

----------------------------

images rescue 2017:

scooby99 · September 22nd, 2013, 04:00 PM

I was going to post them in one thread, but I can post them in each models section. Thanks for the advice will start scanning the rest now

**Jism Jim** · September 29th, 2013, 07:17 AM

I just posted a guide on stitching images here:
http://vintage-erotica-forum.com/sho...70#post2656270

Metallitubbies · October 14th, 2013, 10:12 AM

I too, also recommend ICE - try it, its free

http://vintage-erotica-forum.com/sho...&postcount=205

TheSharpEye · June 3rd, 2017, 04:27 PM

*** Solved! ***

I need some help from the pro's with stitching a few spreads.
I've tried it on my own, but the results are just too crappy.

Anyone wanna give it a go?

I'm not trying to demand anything, but I'd appreciate it if someone
gave it a try on any of the pics.

The Rachel thread:
http://vintage-erotica-forum.com/t31...-patricia.html

EDIT: All four pics have been stitched by Mr Schniposa!

**sammler** · July 10th, 2017, 10:31 PM

Whether you use ICE, Hugin, or File->Automate->Photomerge... built into Photoshop, they are all good options for stitching.

Here is a link to the Hugin tutorial: http://hugin.sourceforge.net/tutorials/scans/en.shtml

Bottom line: Don't skimp on the overlap. The more of an overlap you provide, the better the automated stitching works. E.g. for a centerfold scan, do a left, middle and right scan. That way you can leave a border on either side and give the stitching program more leeway to crop to straight lines without losing content.

TheSharpEye · January 15th, 2021, 06:27 PM

*** Still unresolved! ***

Let's see if any magician want to take these on?

I'd like to get rid of the obvious folds and paper damages.

And if possible get rid of the texts.

I don't think it's possible to stitch the spread, as it's glued in a way that
removes a piece of the pic..

But who knows?

Any help very much appreciated!

September 21st, 2013, 10:03 PM	#1
scooby99 Senior Member Join Date: Jan 2008 Location: Exeter UK Posts: 133 Thanks: 292 Thanked 2,549 Times in 126 Posts	Stitching pictures help required I have 10 Page 3 pics I would like to post up, I don't see them on the site. Most are full page I can scan them in 2 parts, but I don't have software to stitch them together. Can anyone stitch them for me if I email the parts? Thanks for the help

September 21st, 2013, 11:47 PM	#3
haVEFun here in mourning Join Date: Jun 2012 Location: Netherlands Posts: 1,895 Thanks: 70,697 Thanked 72,540 Times in 1,868 Posts	Hello Scooby99, Where are going to post these images? In each model thread? Please try to scan the pages with an overleap and post the whole scan without trimming the edges. With kind regards, haVEFun here __________________ Thanks to all scanners, moderators and posters; keep this forum alive To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Please read and try to follow the VEForum rules To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Avatar: Siân Adey Jones To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ...... R.I.P. Erdnuss To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

September 22nd, 2013, 12:58 AM	#4
haVEFun here in mourning Join Date: Jun 2012 Location: Netherlands Posts: 1,895 Thanks: 70,697 Thanked 72,540 Times in 1,868 Posts	repost from Softcore models thread originally Thanks for posting Please try this: Scan the page 90 degrees turned/tilted: Probably You can scan the image now in one go (in one piece). Use at least 300 dpi and upload the full size scan, please Upload preferably NOT with host Imagebam.com, as they changed policy, resulting in difficulties with downloading! Update, July 24, 2021 To prevent bleedtrough of text and images from the back page, put a darker sheet behind the page to be scanned. Try with a black or a brown / dark brown piece of paper. See also the other ''Scanning feedback'' threads in the help-section, see here: http://vintage-erotica-forum.com/forumdisplay.php?f=46 With kind regards, haVEFun here. P.S. i am not sure if You have posted Your images in the correct section, therefore a repost here , to prevent information getting lost. ---------------------------- images rescue 2017: __________________ Thanks to all scanners, moderators and posters; keep this forum alive To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Please read and try to follow the VEForum rules To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Avatar: Siân Adey Jones To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. ...... R.I.P. Erdnuss To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by haVEFun here; July 23rd, 2021 at 11:33 PM.. Reason: ibam not prefered anymore

September 29th, 2013, 07:17 AM	#6
Jism Jim Sourcer of Smut Join Date: Aug 2007 Posts: 8,828 Thanks: 83,540 Thanked 341,582 Times in 8,421 Posts	I just posted a guide on stitching images here: http://vintage-erotica-forum.com/sho...70#post2656270 __________________ To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Feel free to post my scans to the relevant model threads, but do give credit

October 14th, 2013, 10:12 AM	#7
Metallitubbies Senior Member Join Date: Jan 2008 Location: Washington State U.S.A. Posts: 114 Thanks: 1,087 Thanked 8,630 Times in 112 Posts	ICE I too, also recommend ICE - try it, its free http://vintage-erotica-forum.com/sho...&postcount=205

September 21st, 2013, 11:27 PM	#2
scooby99 Senior Member Join Date: Jan 2008 Location: Exeter UK Posts: 133 Thanks: 292 Thanked 2,549 Times in 126 Posts	OK seems nobody can help. They are the entire collection of Page 3 in 3D from July 1991 and January 1992. Will scan and post as 2 part images. Girls are:- Kathy Lloyd, Donna Ewin, Katie Orgill, Ruby Finnegan, Rachel Garley. Full page. Sarah Jaffer, Kathy Lloyd, Lisa Bangert, Sammi, not full page

September 22nd, 2013, 04:00 PM	#5
scooby99 Senior Member Join Date: Jan 2008 Location: Exeter UK Posts: 133 Thanks: 292 Thanked 2,549 Times in 126 Posts	I was going to post them in one thread, but I can post them in each models section. Thanks for the advice will start scanning the rest now

June 3rd, 2017, 04:27 PM	#8
TheSharpEye Senior Member Join Date: Apr 2009 Posts: 196 Thanks: 459 Thanked 3,583 Times in 180 Posts	* Solved! * I need some help from the pro's with stitching a few spreads. I've tried it on my own, but the results are just too crappy. Anyone wanna give it a go? I'm not trying to demand anything, but I'd appreciate it if someone gave it a try on any of the pics. The Rachel thread: http://vintage-erotica-forum.com/t31...-patricia.html EDIT: All four pics have been stitched by Mr Schniposa! __________________ Serious To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. collector - You know what to do... To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by TheSharpEye; June 3rd, 2017 at 09:20 PM..

July 10th, 2017, 10:31 PM	#9
sammler hoarder of smut Join Date: Dec 2007 Location: north by northwest Posts: 469 Thanks: 7,155 Thanked 21,907 Times in 468 Posts	Whether you use ICE, Hugin, or File->Automate->Photomerge... built into Photoshop, they are all good options for stitching. Here is a link to the Hugin tutorial: http://hugin.sourceforge.net/tutorials/scans/en.shtml Bottom line: Don't skimp on the overlap. The more of an overlap you provide, the better the automated stitching works. E.g. for a centerfold scan, do a left, middle and right scan. That way you can leave a border on either side and give the stitching program more leeway to crop to straight lines without losing content.

January 15th, 2021, 06:27 PM	#10
TheSharpEye Senior Member Join Date: Apr 2009 Posts: 196 Thanks: 459 Thanked 3,583 Times in 180 Posts	* Still unresolved! * Let's see if any magician want to take these on? I'd like to get rid of the obvious folds and paper damages. And if possible get rid of the texts. I don't think it's possible to stitch the spread, as it's glued in a way that removes a piece of the pic.. But who knows? Any help very much appreciated! __________________ Serious To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. collector - You know what to do... To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by TheSharpEye; August 19th, 2023 at 12:25 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode